SERIA CORPORATION

Semi-Auto Printing Machine for PC

SSA-PC660A

Design Concept

Responding to the requirement from electronics industries its density growth which requires high level printing quality. By numerical control of printing parameter, it becomes possible to perform high printing without skill or experience. Also the unit is equipped with unique function and user firendly semi-automatic screen printer.

Feature

Table vertical slide system
Corresponding from thin to thick material
Table positioning by magnet chuck
Improved accuracy and quiet operation by frame up/down servo
Print parameter settng by touch panel

Function

Standard

Option

No settings

Squeegee/Scraper motorized down stop

Squeegee/Scraper auto 0 point adjustment

Squeegee swing

Head bias

Double squeegee

Squeegee auto pressure

Scraper auto pressure

Scooper

Squeegee/Scraper L/R independent pressure

Frame air clamp

Back squeegee

Rail and air off contact

Motorized off contact

Front/rear off contact

Frame fine adjustment knob

Table fine adjustment konb

Carriage transfer

Print table transfer

Web transfer

Table template

Table work clamp

XYθ frame alignment

XYθ print table

XYθ alignment stage

Image processor alignment

Color large size display

Print condition touch panel setting

Clean cover

Air device clean specification

Area sensor

Specification

Max. Work Size	W600*D600mm (varies depends on the thickness of substrate)
Work Thickness	0.1t-2.3t mm
Work Weight	Max. 5kg
Max. Frame Size	W1100*D1100mm
Min. Frame Size	W600*D600mm
Frame Thickness	30t-40t mm / 20t-30t mm (with Spacer)
Frame Holders	Support at Front and Rear Side (Front: Swing Type) 4 Position Pneumatic Clamp + Manual Knob at Front and Rear Side Each 2 Positions
Frame Bar Holder	Rear Size Pneumatic Clamp
Peel Off	0-15mm
Peel Off System	Cam and AC servo motor drive (flat when ink coat)
Squeegee Pressure	6-80kg
Squeegee Adjustment	45mm
Squeegee Lift	40mm
Squeegee Angle	60°-90°
Squeegee Bias Angle	±5°
Squeegee Speed	5-500mm/sec
Squeegee Stroke	800mm
Scooper	Unit Type
Clearance Adjustment	0-15mm (Motorized)
Sub-Lift Volume	330mm (Screen Frame Auto Lock at Top End)
Print Table Size	W850*D900mm
Vacuum Area	W600*D600mm
Vacuum Hole Diameter / Pitch	φ1.4mm / 20mm
Table Fine Adjustment Method	by Three Position Nucri-Knob as The Front
Table Height	940mm
Dimensions
Weight	1200kg
Power Supply	3φ AC200V 50/60Hz 2kw
Compressed Air	50 litters/min. (0.54MPa)